Well Drilling
Replacement wells, with old-well abandonment.
An old, unused well is not just an eyesore — it is a hazard and a direct route for contamination into the aquifer everyone here draws from. Proper sealing is required and inexpensive. Here is what abandonment costs in the Valdosta area and why it matters.
Properly sealing an old or unused well in the Valdosta area typically runs about $500 to $1,500, depending on the well's depth and diameter and how easy it is to access. Deeper or large-diameter wells cost more because they take more sealing material to plug correctly. It is a small cost for removing a real liability from your property. Request a quote and let us know the well's rough age and size if you have it.
An unused well is an open pathway for surface contamination — fertilizer, fuel, bacteria — to travel straight down into the groundwater that supplies homes across Lowndes County. An uncapped or collapsing well is also a physical safety hazard. Georgia rules require unused wells to be properly plugged by a licensed contractor, not just capped or filled with dirt and debris, so the seal actually protects the aquifer.
Proper abandonment means removing obstructions and any pump, then filling and sealing the well from the bottom up with approved grout or bentonite so no pathway remains, and documenting the work as required. When a new replacement well is drilled, the old one is usually required to be abandoned at the same time, and both can be handled as one project. Ask that the work is done to Georgia standards and documented.
About $500 to $1,500 depending on the well's depth, diameter, and access.
An unused well is a contamination pathway to the aquifer and a safety hazard; Georgia requires proper plugging by a licensed contractor.
Usually yes, and both can be done as one project.
No — improper filling does not seal the well and is not code-compliant. It must be grouted and sealed correctly.
Visit the full FAQ page for more.
Replacement wells, with old-well abandonment.
Pump removal and service.
Assess an existing well's condition.
You can also review well rehabilitation, pressure systems, and the areas we serve.